Tech Support

My machine is pulsing. 

Possible causes include:

1.) Dirty Media

 

2.) Debris around air inlet jet.

  1. Fully depressurize machine.

  2. Remove 2 bolts from bottom of machine.

  3. Remove 2 “ears” from bottom of machine.

  4. Remove air inlet jet (looks like a pilgrim hat).

  5. Remove gasket.

  6. Push casting and air hose out of the way.

  7. Flush out inside of equipment with water.

Once media and water are out of machine, reverse procedure:

  1. Put gasket on air inlet jet.

  2. Insert air inlet jet and gasket.

  3. Hold casting up to bottom of machine.

  4. Use ears and bolts to re-secure casting.

 

Didn't solve your problem? Look at answers to some common issues here or contact us at 713-869-2227.